Infinity Industrial Store Partes Industriales

Todos los productos


Importamos miles de refacciones de las marcas más reconocidas directas de EEUU, Europa y Asia.
Si la refacción que buscas no aparece en nuestro catálogo, pídela en México al teléfono (larga distancia SIN COSTO) 01800 333 9350 ó si marcas de otro país al (+52 442) 295-0460. Escríbenos a través de Facebook.



  • REOSTATO RHS100
    REOSTATO
    RHS100

    REOSTATO

    Ver Agregar US$ 54.90

  • PERNO PIVOTE LAWSON DE 1/2X1/2,3/8-16USS SHOULDER SCREW EMPUJADOR DE BARRAS GSD1-17-44
    PERNO PIVOTE LAWSON DE 1/2X1/2,3/8-16USS SHOULDER SCREW EMPUJADOR DE BARRAS
    GSD1-17-44

    PERNO PIVOTE LAWSON DE 1/2X1/2,3/8-16USS SHOULDER SCREW EMPUJADOR DE B

    Ver Agregar US$ 130.99

  • POCKETCAL MILLIAMP CALIBRATOR 134-2
    POCKETCAL MILLIAMP CALIBRATOR
    134-2

    POCKETCAL MILLIAMP CALIBRATOR

    Ver Agregar US$ 1219.00

  • TRONZADORA 120 VOLT DCH 300
    TRONZADORA 120 VOLT
    DCH 300

    TRONZADORA 120 VOLT

    Ver Agregar US$ 1921.70

  • CABLE, CONNECTOR, PLUG, M8, 3POL SACC-M12MS-4QO-0,34M
    CABLE, CONNECTOR, PLUG, M8, 3POL
    SACC-M12MS-4QO-0,34M

    CABLE, CONNECTOR, PLUG, M8, 3POL

    Ver Agregar US$ 25.20

  • MILLING ANSI: CCMT-3(2.5)2-HM LENGHT 9.7MM HEIGHT 3.97MM INSIDE DIA 4.4MM RADIUS 0.8MM CIRCLE INCRIBED 9.525M CCMT-09T308-HM
    MILLING ANSI: CCMT-3(2.5)2-HM LENGHT 9.7MM HEIGHT 3.97MM INSIDE DIA 4.4MM RADIUS 0.8MM CIRCLE INCRIBED 9.525M
    CCMT-09T308-HM

    MILLING ANSI: CCMT-3(2.5)2-HM LENGHT 9.7MM HEIGHT 3.97MM INSIDE DIA 4.

    Ver Agregar US$ 80.00

  • FILTER, CARTRIDGE FOR FINAL FINISH DUST COLECTOR P034303-016-436 DFE ULTRA-WEB FR CARTRIDGE (349MM X 349MM9 OD X 660 MM L (13.74 X 13.74) OD X 26.00L P034303-016-436
    FILTER, CARTRIDGE FOR FINAL FINISH DUST COLECTOR P034303-016-436 DFE ULTRA-WEB FR CARTRIDGE (349MM X 349MM9 OD X 660 MM L (13.74 X 13.74) OD X 26.00L
    P034303-016-436

    FILTER, CARTRIDGE FOR FINAL FINISH DUST COLECTOR P034303-016-436 DFE U

    Ver Agregar US$ 281.50

  • SULIMA AIR HOSE BALANCER HR09-U5012
    SULIMA AIR HOSE BALANCER
    HR09-U5012

    SULIMA AIR HOSE BALANCER

    Ver Agregar US$ 100.75

  • BEARING, BALL TYPE SHAFT DIAMETER 3/4 IN O.D. 44.5 MM 1-3/4 IN O.D. WIDTH 12.7 MM SEAL MATERIAL BUNA-N LOADCAPDIN1300LBS LOADCAPSTAT1025LBS MAXSPEED 2500 RPM 6384K810
    BEARING, BALL TYPE SHAFT DIAMETER 3/4 IN O.D. 44.5 MM 1-3/4 IN O.D. WIDTH 12.7 MM SEAL MATERIAL BUNA-N LOADCAPDIN1300LBS LOADCAPSTAT1025LBS MAXSPEED 2500 RPM
    6384K810

    BEARING, BALL TYPE SHAFT DIAMETER 3/4 IN O.D. 44.5 MM 1-3/4 IN O.D. WI

    Ver Agregar US$ 28.60

  • HYTREL FOR SUREFLEX SIZE 6 COUPLING DOUBLE SPLIT 6HS
    HYTREL FOR SUREFLEX SIZE 6 COUPLING DOUBLE SPLIT
    6HS

    HYTREL FOR SUREFLEX SIZE 6 COUPLING DOUBLE SPLIT

    Ver Agregar US$ 153.15

  • SWITCH C-9622-3
    SWITCH
    C-9622-3

    SWITCH

    Ver Agregar US$ 343.65

  • CODO OZGFF-125
    CODO
    OZGFF-125

    CODO

    Ver Agregar US$ 23.00



INFORMACION
CONTACTO TERMINOS Y CONDICIONES DECLARACIÓN DE PRIVACIDAD
REDES SOCIALES
facebook
COTIZA TU PARTE INDUSTRIAL AHORA


© Infinity Industrial 2020©